Wells WVAE-55FS Instruções de Operação descarregar pdf (Página 11)

DAILY CLEANING

Wash the exterior of the

ventilator hood with

warm water, mild soap

or detergent, and a

clean, non-

abrasive cloth a

minimum of once

a day. Rinse

with clean, warm

water and dry

with a clean,

non-abrasive cloth.

WEEKLY CLEANING

Remove the grease receptacle and grease drip

pan and empty both containers. Remove the

Stainless Steel Baffle filter. Wash and rinse the

baffle filter, grease receptacle, and grease drip

pan in the sink or dishwasher using mild de-

greasing detergent and warm water. Dry with a

clean, non-abrasive cloth.

MONTHLY CLEANING

Cover the frypot. Remove the Grease Vapor

HEPA filter and optional, Odor Control charcoal

filter. Wash the interior of the ventilator with

warm water, a mild soap or detergent and a

clean, non-abrasive cloth. Dry thoroughly with a

clean, dry non-abrasive cloth.

In the USA, use and maintenance shall be in

accordance with the current edition of the

Standard for Ventilation Control and Fire

Protection of Commercial Cooking Operations,

NFPA 96.

NOTE: A signed and dated Fryer Hood Maintenance

Log must be maintained on the premises and

shall be available for use by the authority

having jurisdiction.

See sample in the back of this manual.

THREE MONTH MAINTENANCE

Clean the entire hood plenum and blower section.

SIX MONTH MAINTENANCE

1. Inspection and testing of total operation

including fire damper and all safety interlocks

shall be performed by qualified service personnel.

2. All fire suppression system actuation

components including manual pull station and

any remote manual pull station must be

inspected for proper operation in accordance

with the maintenance schedule published in

Ansul

®

R-102 System Design, Installation,

Recharge and Maintenance Manual (#418087).

3. On VAE Model fryers, open the rear cover access

door and lubricate the lift worm threads with

moly (molybdenum disulfide) grease.

ANNUAL MAINTENANCE

The fusible links for the fire suppression system

must be replaced. Nozzles and manual pull

station must be cleaned in accordance with

Ansul

®

R-102 System Design, Installation,

Recharge and Maintenance Manual (#418087).

TWELVE YEAR MAINTENANCE

The fire suppression agent tank and 1/4"

(6,4mm) flex hose must be hydrostatically tested.

The fire extinguishing agent must be replaced in

accordance with the maintenance schedule

published in Ansul

®

R-102 System (Standard

UL300 listed). This maintenance is to be

performed by authorized Ansul

®

service

personnel only.

Operation and Care Manual #8452/53/55

PG.10

VENTILATOR CLEANING INSTRUCTIONS

REQUIRED VENTILATOR MAINTENANCE

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Comentários a estes Manuais

Sem comentários